Snow saw guide: choosing a saw for snow pits and stability tests
A snow saw is a core tool for anyone who digs snow pits. You use it to cut clean pit walls and to isolate the columns for stability tests such as the Extended Column Test (ECT). This guide covers what matters when you choose one, and how to look after it.
What a snow saw is for
- Cutting a clean pit wall, so the layers are easy to see and measure.
- Isolating columns for stability tests. Cutting the sides and back of a column cleanly, without disturbing it, makes the test result easier to read.
- Measuring. A saw with depth marks doubles as a ruler for layer thickness and column size, and a crystal grid on the blade helps you size snow grains.
- Cutting blocks for igloos or wind walls.
Blade length: the most important choice
The length of the blade decides which cuts you can make in one pass. A short saw packs small, but you may need a cord or several overlapping cuts to isolate a full-size test column. A long saw can reach the back of a column directly. One Tindeq Snow Saw owner put it this way in their review: it “lets you saw and isolate an ECT without the need for a cord”.
The trade-off is weight and pack size. Look for a saw that lets you choose: short for quick pits on light days, long for full test columns.
Fixed, folding or modular?
- Fixed blades are simple and stiff, but the pack size is the blade length.
- Folding or telescoping saws pack shorter, but every joint can add play.
- Modular saws are built from segments that you connect. You choose the length for the day and can leave a segment at home.
Other things to look for
- Stiffness: a blade that flexes wanders off line in dense snow.
- Measuring marks that stay readable: engraved marks last longer than printed ones.
- A crystal grid on the blade for grain size, so you carry one tool less.
- Weight of the saw and the sheath together, since you carry both.
- A sheath that protects your pack and other gear from the teeth.
The Tindeq Snow Saw
We designed the Tindeq Snow Saw to be light, compact, sturdy and long enough for the common snowpack stability tests. It won an ISPO Award.
- Modular, three segments. Two segments make a 70 cm saw; all three give 105 cm of cutting length.
- Light. 375 g for all three segments, plus a 50 g sheath. Leaving the middle segment at home saves 126 g.
- Packs to 45 cm.
- Anodised 7075-T6 aluminium with laser-engraved measuring marks and snow-crystal grids.
- Made in Norway. Orders of 10 or more can have a company logo engraved.
Instructions for assembling and using it are in the Snow Saw user instructions.
Care
- Dry the segments after each day out before storing them in the sheath.
- Check the joints and teeth before each trip, and stop using a damaged segment.
- Keep the sheath on in your pack, both to protect the teeth and to protect your gear.
Frequently asked questions
How long should an avalanche snow saw be?
Long enough for the tests you actually do. If you only cut pit walls and small columns, a short saw is fine. If you run full-size column tests, a longer blade lets you make the cuts without a cord. A modular saw gives you both.
Can I use a snow saw for igloo blocks?
Yes. A long, stiff blade cuts clean blocks in firm, wind-packed snow.
Is a snow saw good for cutting wood?
No. A snow saw has teeth designed for snow. For branches or firewood, use a saw made for wood.